Non Sparking Allen Keys - Ball End
Llave Allen - Extremo de bola
Innensechskantschlüssel - Kugelende
Шестигранный ключ - шаровой конец
Chave Allen - ponta esférica
Non-Sparking Ball End Alley Key is equipped with a ball hex on the long end, making it easier to slide the key into the slot. The ball end allows you to reach at an offset angle of 30 degrees, which can be helpful in blind areas or hard-to-reach spots. Moreover, this feature can come in handy when the bolt or screw is in close proximity to an obstruction on one side, allowing you to feel your way to the required position more quickly.
Non Sparking Ball End Allen Keys are available in QTi Copper Titanium Alloy, BronAL Aluminium Bronze and ACTOOL for Acetylene Environments
SIZES & SPECIFICATIONS
Part Number | Size |
|---|---|
AK-1002.5B | QTi® Allen Key Ball End - 2.5 mm |
AK-1003B | QTi® Allen Key Ball End - 3 mm |
AK-1004B | QTi® Allen Key Ball End - 4 mm |
AK-1005B | QTi® Allen Key Ball End - 5 mm |
AK-1006B | QTi® Allen Key Ball End - 6 mm |
AK-1007B | QTi® Allen Key Ball End - 7 mm |
AK-1008B | QTi® Allen Key Ball End - 8 mm |
AK-1010B | QTi® Allen Key Ball End - 10 mm |
AK-1012B | QTi® Allen Key Ball End - 12 mm |
DOs & DONTs
While tightening or loosening a bolt, carefully insert the tip of your Non Sparking Allen hex wrench into the hexagonal cross section of the bolt and proceed to firmly turn the wrench.
Spark Resistant Ball end allen hex keys have ball heads at the ends to provide more swivel room for each wrench.
Select the correct Spark Proof Allen hex key which exactly fits the head of an allen bolt.
NEVER use a hammer or extension on this wrench.
Do NOT use worn out Non Sparking Allen keys, it will slip and may cause injury.
Do NOT use an Alley Key to free a “Stubborn/Frozen” Allen Bolts.
