Made in India

Copper Titanium

Copper Titanium Nozzle Tips for Hot Runner Systems provide high wear resistance to abrasive molten plastic polymers coupled with good thermal conductivity which precisely allows controlling molten plastic temperature, the nozzle is externally heated using heating coils. Only at the very end - at the nozzle tip no further heating aid is used and the heated nozzle itself must transfer the heat to the plastic.


High Thermal 


Superior Temperature Control

No Beryllium. Environmental Friendly


Corrosion Resistant

Environmentally Friendly tools
control tem.png

Hot Runner System &  Nozzle Tip?

A hot runner system is an assembly of heated components used in plastic injection moulds that inject molten plastic into the cavities of the mould

Plastics require an extremely precise processing temperature. If the temperature is slightly too warm, the material may be damaged. If the temperature falls too sharply, the plastic hardens and no longer flows optimally into the mould. Heat transfer in the hot runner nozzle is therefore critical.

Materials Comparison for
Hot Runner System Nozzle Tip

Beryllium-copper alloys are widely used because of their electrical and thermal conductivity, hardness, and good corrosion resistance.

Beryllium and Beryllium Alloys are risk to your health and can cause “CANCER”.

OSHA has regulated Beryllium on the Hazardous Substance List and it is on the Special Health Hazard Substance List because Beryllium is a Category 1 CARCINOGEN in humans. It has been shown to cause Chronic Beryllium Disease or Berylliosis (named after Beryllium) which is a type of Lung Cancer.

ONE Stop
Fully Finished Hot Runner Nozzle Tip 

Steel and Copper Beryllium are both have their individual drawbacks. Steel has very poor thermal conductivity and Copper Beryllium is extremely hazards making it unsafe for users and environment. Copper Titanium Nozzle Tips for hot Runner has good thermal conductivity, High strength ,High hardness and a best substitute to all other alloy

Why Copper Titanium 
Hot Runner Nozzle Tip?

Copper Titanium Alloy for
Plastic Industry Application


About Us 

Pahwa MetalTech is a high-tech materials technology company, specialized in the manufacturing of advance copper alloys and its products for applications in Oil & Gas, Automotive, Welding, Heavy Engineering, Defence, Electrical, and General Industry. Pahwa MetalTech has introduced an innovative Copper Titanium (QTi®) alloy to replace hazardous Copper Beryllium alloys.